GB/T 15691-2008 香辛料调味品通用技术条件

作者:标准资料网 时间:2024-05-10 13:34:50   浏览:8462   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:香辛料调味品通用技术条件
英文名称:General techniques and standards for spices and condiments
中标分类: 食品 >> 食品添加剂与食用香料 >> 食用香料
ICS分类: 食品技术 >> 香料和调料、食品添加剂 >> 香料和调料
替代情况:替代GB/T 15691-1995
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-07-16
实施日期:2008-11-01
首发日期:1995-08-17
作废日期:
主管部门: 中华全国供销合作总社
提出单位:中华全国供销合作总社
归口单位:中华全国供销合作总社
起草单位:中华全国供销合作总社南京野生植物综合利用研究院
起草人:陈仕荣、张卫明
出版社:中国标准出版社
出版日期:2008-10-01
页数:8页
计划单号:20063477-T-442
适用范围

本标准规定了粉状和颗粒状植物性香辛料调味品的术语、产品分类、原料要求、技术要求、试验方法、检验规则和标志、包装、运输、贮存、保质期。
本标准适用于以植物性香辛料为主要原料或配以其他辅料制成的用于食品中的香辛料调味品。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T 6388 运输包装收发货标志
GB 7718 预包装食品标签通则
GB/T 12729.1 香辛料和调味品 名称
GB/T 12729.2 香辛料和调味品 取样方法
GB/T 12729.6 香辛料和调味品 水分含量的测定(蒸馏法)
GB/T 12729.7 香辛料和调味品 总灰分的测定
GB/T 12729.9 香辛料和调味品 酸不溶性灰分的测定
定量包装商品计量监督管理办法 国家质量监督检验检疫总局(2006)第75号令

所属分类: 食品 食品添加剂与食用香料 食用香料 食品技术 香料和调料 食品添加剂 香料和调料
下载地址: 点击此处下载
【英文标准名称】:Asepticprocessingofhealthcareproducts-Part1:Generalrequirements
【原文标准名称】:医疗保健产品的无菌加工.第1部分:一般要求
【标准号】:ISO13408-1-2008
【标准状态】:现行
【国别】:国际
【发布日期】:2008-06
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC198
【标准类型】:()
【标准水平】:()
【中文主题词】:无菌的;检验;定义;医疗卫生事业;制造;医疗技术学;生产;质量;质量保证;规范(验收);无菌
【英文主题词】:Aseptic;Checks;Definitions;Healthservices;Manufacturing;Medicaltechnology;Production;Quality;Qualityassurance;Specification(approval);Sterility
【摘要】:1.1ThispartofISO13408specifiesthegeneralrequirementsfor,andoffersguidanceon,processes,programmesandproceduresfordevelopment,validationandroutinecontrolofthemanufacturingprocessforaseptically-processedhealthcareproducts.1.2ThispartofISO13408includesrequirementsandguidancerelativetotheoveralltopicofasepticprocessing.Specificrequirementsandguidanceonvariousspecializedprocessesandmethodsrelatedtofiltration,lyophilization,clean-inplace(CIP)technologies,sterilizationinplace(SIP)andisolatorsystemsaregiveninotherpartsofISO13408.NOTEThispartofISO13408doesnotsupersedeorreplacenationalregulatoryrequirements,suchasGoodManufacturingPractices(GMPs)and/orpharmacopoeialrequirementsthatpertaininparticularnationalorregionaljurisdictions.
【中国标准分类号】:C50
【国际标准分类号】:11_080_01
【页数】:54P.;A4
【正文语种】:英语


Product Code:SAE J361
Title:Procedure for Visual Evaluation of Interior and Exterior Automotive Trim
Issuing Committee:Textile And Flexible Plastics Committee
Scope:This SAE Recommended Practice applies to parts and materials used in vehicle manufacture which are intended to be acceptable color matches to a specified standard. This document is intended for use with parts or materials which are opaque or nearly so. Materials covered by this document include topcoat paint finishes, interior soft trim, interior and exterior hard trim, and exterior film and flexible trim.PurposeThe intent of this document is to precisely specify procedures for the visual evaluation of appearance of colored materials or parts incorporated in the manufacture of vehicles. The document provides a consistent engineering practice for the determination of visual color difference between materials or parts of the same or like materials. A suitable fixture providing daylight, fluorescent, and horizon lighting conditions is necessary for this evaluation.